Electrical problems can stress any driver. They seem to appear out of nowhere and can often be mistaken for other issues. As your Ford dealer in Conway, SC, we can repair any problem in the electrical system. These are samples of some of the issues that we can repair.
Starting Problems
Starting your car requires three important components to work together. The battery provides the initial electrical charge to the starter motor, and the starter motor cranks your engine. Once the engine is running, the alternator starts to work and begins recharging your battery. A problem with any of these components will make starting difficult or impossible without a repair.
A worn battery won't supply enough power for the starter motor. A damaged starter motor may receive the charge from the battery but not initiate the crank. Finally, a failing alternator might not produce enough power to recharge the battery. A lack of recharging will cause the battery to fail. Our technicians will examine the components and their connections to find and fix the problem.
Stalling Problems
Stalling occurs when more than one of your cylinders fails to fire correctly. Failure to fire can be caused by a failing alternator, damaged ignition coils or spark plugs, or a failed sensor. Each of these causes can make driving difficult and dangerous, as you don't know when the engine could stall again. Our technicians will need to examine the electrical system to uncover the cause of the problem.
A failing alternator might not supply enough power to the spark plugs to ignite the compressed fuel-air mixture in the cylinders. Spark plugs could be worn out or damaged, or an electrical fault could interfere with their power supply. Damaged ignition coils won't generate the additional power the spark plugs need for combustion. Our Ford-trained technicians will find and repair the problem.
Fuse Problems
All the electrical components have fuses connected to them. These fuses ensure that their components receive a steady flow of power and protect them against surges. An electrical fault can occur due to age or damage, which sends a rogue electrical surge through the system. A fuse will absorb the incoming surge and blow out. The component is protected from damage but won't work until the fuse is replaced.
Fuses can also be affected by the very slight movement they experience as you drive. Over time, a fuse could develop a minute gap between itself and the electrical system. Electricity can't flow through a gap, and the power to the component will be cut off. We can test the fuses and reseat or replace them if required.
If you think your Ford has an electrical problem, call us ASAP at Conway Ford.